Radial spherical plain bearings requiring maintenance
| Illustration | Designation |
Characteristics |
|
GE .. E (→ product section) (→ product table) |
Open (without seal), can only be relubricated from the side; available in metric sizes |
|
GE .. ES GEZ .. ES (→ product section) (→ product table) |
Open (without seal), can be relubricated via lubrication holes and an annular groove in both rings; available in metric and inch (Z part of designation) sizes |
|
GE .. ES-2RS GEZ .. ES-2RS (→ product section) (→ product table) |
With a double-lip seal on both sides, can be relubricated via lubrication holes and an annular groove in both rings; available in metric and inch (Z part of designation) sizes |
|
GE .. ES-2LS GEZ .. ES-2LS (→ product section) (→ product table) |
With a triple-lip heavy-duty seal on both sides, can be relubricated via lubrication holes and an annular groove in both rings; available in metric and inch (Z part of designation) sizes |
|
GEH .. ES GEZH .. ES (→ product section) (→ product table) |
Open (not sealed); wider inner ring and larger outside diameter compared to GE .. ES and GEZ .. ES series, to enable higher load ratings and larger tilt angle; can be relubricated via lubrication holes and an annular groove in both rings; |
|
GEH .. ES-2RS GEZH .. ES-2RS (→ product section) (→ product table) |
With a double-lip seal on both sides; wider inner ring and larger outside diameter compared to GE .. ES-2RS and GEZ .. ES-2RS series, to enable higher load ratings and larger tilt angle; can be relubricated via lubrication holes and an annular groove in both rings; available in metric and inch (Z part of designation) sizes |
|
GEH .. ES-2LS GEZH .. ES-2LS (→ product section) (→ product table) |
With a triple-lip heavy-duty seal on both sides; wider inner ring and larger outside diameter compared to GE .. ES-2LS and GEZ .. ES-2LS series, to enable higher load ratings and larger tilt angle; can be relubricated via lubrication holes and an annular groove in both rings; available in metric and inch (Z part of designation) sizes |
|
GEM .. ES GEZM .. ES |
Open (without seals); with an extended inner ring on both sides; can be relubricated via lubrication holes and an annular groove in both rings; for bearing arrangements where a spacer sleeve is normally incorporated on both sides of the inner ring; |
| GEG .. ES | GEG series: inner ring width equals the bore diameter; available in metric sizes | |
| GEG 12 ESA | GEG 12 ESA can only be lubricated via the outer ring | |
|
(→ product section)
(→ product table) |
||
|
GEM .. ES-2RS GEZM .. ES-2RS (→ product section) (→ product table) |
With a double-lip seal and an extended inner ring on both sides, can be relubricated via lubrication holes and an annular groove in both rings; available in metric and inch (Z part of designation) sizes |
|
GEM .. ES-2LS GEZM .. ES-2LS (→ product section) (→ product table) |
With a triple-lip heavy-duty seal and an extended inner ring on both sides, can be relubricated via lubrication holes and an annular groove in both rings; available in metric and inch (Z part of designation) sizes |
UCTH213-40J-300 with Setscrew(inch)
CNSORDERNO: Normal-duty(2)
TOGN: UCTH213-40J-300
SDI: B-R1/8
SD: 2 1/2
UCTH212-39J-300 with Setscrew(inch)
CNSORDERNO: Normal-duty(2)
TOGN: UCTH212-39J-300
SDI: B-R1/8
SD: 2 7/16
UCTH212-38J-300 with Setscrew(inch)
CNSORDERNO: Normal-duty(2)
TOGN: UCTH212-38J-300
SDI: B-R1/8
SD: 2 3/8
UCTH212-36J-300 with Setscrew(inch)
CNSORDERNO: Normal-duty(2)
TOGN: UCTH212-36J-300
SDI: B-R1/8
SD: 2 1/4
UCTH211-35J-300 with Setscrew(inch)
CNSORDERNO: Normal-duty(2)
TOGN: UCTH211-35J-300
SDI: B-R1/8
SD: 2 3/16
UCTH211-34J-300 with Setscrew(inch)
CNSORDERNO: Normal-duty(2)
TOGN: UCTH211-34J-300
SDI: B-R1/8
SD: 2 1/8
