- Inch DUSTAC™ Shaft Seal
- DV/140
DV/140 Bearing | Inch DUSTAC™ Shaft Seal
DV/140 PDF download| DV/140 interchange LOYAL DV/140 | |
| DV/140 cross reference LOYAL DV/140 | |
| DV/140 Equivalent bearing interchange guide： | |
| Price： | enquiry |
| Model Number： | DV/140 |
| d: | V-150-A |
| D: | 534 |
| B: | Shaft seal may be ordered in place of the standard LER triple ring seals supplied with the pillow bl |
| r(min): | 2-253 |
| r1(min): | 1. Check shaft diameters to print specification. Remove any burrs or sharp edges. Be sure shaft surf |
| Width: | EPS-20 |
| Size: | 5 15/16 in |
| Weight： | 1 1/16 in |
| Bearing Number： | 634 |
| Diameter S-1 | 5 15/16 in |
| Assembly Standout B | 1 1/16 in |
| Pillow Block Housing Number 500 | 534 |
| Pillow Block Housing Number 600 | 634 |
| V-Ring Seal | V-150-A |
| O-Ring | 2-253 |
| End Plug | EPS-20 |
| Order Instructions | Shaft seal may be ordered in place of the standard LER triple ring seals supplied with the pillow blocks listed. They also are available to retrofit existing installations.To order any pillow block ho |
| Installation Procedure | 1. Check shaft diameters to print specification. Remove any burrs or sharp edges. Be sure shaft surface is clean and dry beyond the area of seal location.2. Expand the V-ring seal over the shaft to th |
| No. | Weight | Bearing Number | Housing Construction | UPC Code | Shaft Size Type | Full Timken Part Number |
|---|---|---|---|---|---|---|
| LS200072ALN1PCZ1AL+(6) | 6.0 | - | - | - | - | - |
| GEH 90 TXA-2LS | 2850.000 | 1730.000 | 15.000 | 90.000 | 150.0000 | 500 |
| NS350096JMN1KCZ1AL+(8) | 8.0 | - | - | - | - | - |
| 3MV9106WI | 1 mm0.039 in | 1 mm0.039 in | 46000 rpm | 23000 rpm | 7.143750 mm9/32 in | METRIC |
| HJ2332 | 160 | HJ2332 | 3.16 | 4.0 | - | - |
| 7226BDT | Standard | 130 | 2.5 | 3.0 | 7226BDT | 2400 |
| 22252R | 5.0 | 870 | 650 | 22252R | 480 | 347 |
| 2MMC9112WI | 1 mm0.039 in | 1 mm0.039 in | 32640 rpm | 16320 rpm | 10.318750 mm13/32 in | METRIC |
| 423128 | 140 | 1.0 | 3.0 | 423128 | 11.800 | 1700 |
| LM 406080N U AJ | One side Seal (U) | Steel | LM 406080N U AJ | Plastic | 40 | - |
Crankshaft big end bearing set 2.5 & 3.0 Ford Duratec V6 ...
TIMKEN DV-140 Pillowblock accessory
Part Number DV-140, Inch DUSTAC™ Shaft Seal On The Timken ...
DV-140 SKF DV-140 BEARINGS AND ACCESORIES (BALEROS Y ...
Buy Dovetail Sliding Assemblies | DV-140 - Reid Supply
DV/140 bearing | Inch DUSTAC™ Shaft Seal
Weight: 7 3/16 in
Bearing Number: V-180-A
Housing Construction: 540
UPC Code: Shaft seal may be ordered in place of the standard LER triple ring seals supplied with the pillow bl
Shaft Size Type: 2-259
Full Timken Part Number: 1. Check shaft diameters to print specification. Remove any burrs or sharp edges. Be sure shaft surf
Weight: 2 11/16 in
Bearing Number: V-65-A
Housing Construction: 516
UPC Code: Shaft seal may be ordered in place of the standard LER triple ring seals supplied with the pillow bl
Shaft Size Type: 2-231
Full Timken Part Number: 1. Check shaft diameters to print specification. Remove any burrs or sharp edges. Be sure shaft surf
Weight: 4 15/16 in
Bearing Number: V-130-A
Housing Construction: 528
UPC Code: Shaft seal may be ordered in place of the standard LER triple ring seals supplied with the pillow bl
Shaft Size Type: 2-244
Full Timken Part Number: 1. Check shaft diameters to print specification. Remove any burrs or sharp edges. Be sure shaft surf
Weight: 3 15/16 in
Bearing Number: V-100-A
Housing Construction: 522
UPC Code: Shaft seal may be ordered in place of the standard LER triple ring seals supplied with the pillow bl
Shaft Size Type: 2-239
Full Timken Part Number: 1. Check shaft diameters to print specification. Remove any burrs or sharp edges. Be sure shaft surf
