Roller Followers

BAM 4416 Bearing | Inch Series

BAM 4416 interchange IKO BAM 4416
BAM 4416 cross reference IKO BAM 4416
BAM 4416 Equivalent bearing interchange guide：
Price：	enquiry
Model Number：	BAM 4416
d:	69.850
D:	BAM 4416
B:	169.0
r(min):	69.850
r1(min):	79.375
Width:	43500
Size:	104000
STDRT：	25.40
SD：	2.8

STDRT	69.850 mm
ORDER	BAM 4416
MASS	169.0 g
FW	69.850 mm
D	79.375 mm
C	25.40 mm
ST1	2.8 mm
ST2	0 mm
CR	43500 N
C0R	104000 N

No.	STDRT	SR	SD	SA	ORDER	MASS
HR33008J	1.20	Standard	40	1.0	1.0	1.0
XAA32009X/Y32009X	20.000 mm0.7874 in	32009X	1.02 mm0.04 in	3.050 mm0.12 in	28.7	METRIC
2213	2213	1.400	120	2.30	3.5	2.40
30311	31.500	5600	4800	19.300	163.000	176.000
K20x28X25H	K20x28X25H	23000	20.000	28.000	5.80	37.00
230/560KYMBW507C08	3.07	4.67	3.14	490	430	5.000 mm0.200 in
7024BDB FY	120	2.0	7024BDB FY	3100	2300	180
51106	11	47	30	0.6	0.068	6500
NU5164MAW61	NU	N	520	480	METRIC	580.000 mm22.8346 in
UCSPA202-10XH1S6	A-1/4-28UNF N12	Normal-duty(2)	UCSPA202-10XH1S6	Standard	5/8	-

Bearings - AGCO Parts

Needle. 195, 197. 831296M1. BA4416. Needle. 195, 197. 700714310. BAH-0013. Roller. 123, 124. 831231M1. BAM-2012. Needle. 194, 197. 831231V1. BAM-2012.

Bearing BAM 4416 (IKO) | Size and Specification

Needle roller bearings BAM 4416. Bearing number : BAM 4416. Size (mm) : 69.85x79.375x25.4. Brand : IKO. Bore Diameter (mm) : 69,85.

iko-needle-roller-bearings.pdf

C-Lube Machined Type Needle Roller Bearings. Needle Roller Cages for General Usage. TA、TAM. TLA、TLAM. BA、BAM. BHA、BHAM.

Structures of Shell Type Needle Roller Bearings

○Shell Type Grease Retained Full Complement Needle Roller Bearings ... BA 4412 Z. BA 4416 Z. BA 4420 Z. BAM 4410. BAM 4412. BAM 4416. BAM 4420.

BAM 4416 bearing, Needle Roller Bearings 69.85x79.375x25.4 for ...

Needle Roller Bearings BAM 4416, 0.169 kg Bearing mass, (69.85*79.375*25.4 mm), 69.85 mm d (Bore: diameter of the inner ring), 79.375 mm D (Outside: ...

Koyo B-4416 Needle Roller Bearing, Full Complement ...

This Koyo full complement drawn cup needle roller bearing is suitable for applications with high dynamic loads. It has a smaller cross-section than a machined ...